Nederman Mobile Dust/Welding Fumes Extraction/Extractor System

	Mobile Dust/Welding Fumes Extraction/Extractor System
	FilterBox Modular Dust/Welding Fumes Extraction/Dust/Welding Fumes Filter System  Complete mobile FilterBox unit with Extraction Arm Original. FilterBox is a system that solves most common demands regarding extraction of welding fumes and dust. It can be combined to work as a single mobile unit or as a fixed modular unit with expandable capacity. Filter cleaning is manual, semi-automatic or fully automatic (compressed air cleaning) depending on model. Special model for food, medical or chemical industry. All features below apply to the standard model. Accessories can be attached to improve individual applications. Mobile units or fixed wall/floor installations Complete kits or modules for customization Manual, semi-automatic or fully automatic filter cleaning Pressure Drop The pressure drop across the FilterBox varies with air flow and dust load. Maintaining a certain average airflow with increasing dust load requires a shorter interval between cleaning. 1) heavy load 2) light load, welding 3) light load, dust 4) clean filter cartridge Grey areas describe average operating range. mm (inch) *)Recommended mounting height from floor. **) Minimum distance from wall to achieve filter cartridge change. Manual filter cleaning. Complete kits, for fixed or mobile installation  FilterBox Basic Manual filter cleaning by a hand crank. For simple welding and dust applications with no need for automatics. Note! When connected to a fan, a separate starter must be added. FilterBox Monitor Fully automatic mechanical filter cleaning, normally combined with compressed air cleaning. For heavy welding applications. FilterBox Standard Semi-automatic filter cleaning manually initiated. Can be combined with compressed air cleaning. For welding and dust applications. SpaceBlue The FilterBox unit is also available in space blue for food and chemical applications. Combination Posibilities   Fan N29 for heavy duty and long duct systems, 1000-1200 m3/h, 2.2 kW, 220 - 240 / 380 - 420V, 3-phase, 50Hz Fan N24 for light dust, 800-1000 m3/h, 0.75 kW, 110 - 120 / 220 - 240V, 1-phase, 50Hz Fan N24 for light dust, 800-1000 m3/h, 0.9 kW, 200 - 240 / 280 - 420V, 3-phase, 50Hz Extractor arm, max length for arm on mobile unit: 3 m. (See separate brochures for Original Arm, NEX MD, and NEX HD) Silencer, blue Silencer, space blue Floor stand for FilterBox with fan Floor stand for FilterBox connected to central fan Trolley Bracket for wall mounting box with fan Additional bracket for mounting fan N24 on the FilterBox Cable set, 220/240V, 1 phase Cable set, 110V, 1 phase Cable set, 3 phase Compressed air cleaning, 4-6 bar